Furomor Furan Resin Mortar
Furomor Resin Mortar is widely used for Acid Resistant Bricks & Tiles lining works as Bedding & Jointing Mortar for Tanks, Floor, Drain, Foundation, Chemical Reaction Vessels, and Neutralization Pit etc.
Resistant:
- It is resistant to Non-Oxidizing Acids, Alkalies, Salt, Solvents, Greases, Detergents and Oils.Carbon Filled
- Furomor Mortar is to be used to resist hot & highly concentrated alkalies, Hydrofloric Acid, Flourid Salted etc.
170° C (Max.)
- It is resistant to Non-Oxidizing Acids, Alkalies, Salt, Solvents, Greases, Detergents and Oils.Carbon Filled
Preparation of Mortar:
- Preparation of Mortar generally consists of Solution & Powder. In order to obtain good working consistency, the average mixing ratio is 1 Pbw of Solution & 3 pbw of Powder. This ratio will slightly vary depending upon the temperature and working conditions.
- Prepare small batches of Mortar. Stirrer the Solution thoroughly before use. Place the Solution in a suitable mixing pan and add powder in it. Mix thoroughly with a spatula or Trowel. The mixing operation shall be continued until a uniform mixture is obtained.
- Make sure that all the Mortar is used from the mixing pan before another batch is prepared.
Setting / Curing :
- Furomor Resin Mortar is a Self-hardening due to its chemical reaction which occurs when the Powder & Resin are mixed together.
- An initial setting occurs in 6 to 8 hrs. at 30°C
- Final Setting occurs in 24 to 48 hrs. at 30°C
- Curing time: 7 days at 30°C
- Please ensure that no water shall be spilled over the bricks lining works before it completely cured.
Furomor Furan Resin Mortar Cond..
Mechanical/Physical property:
- Working time at 30°C : 20 minute (min)
- Density of cured mortar : 1.8 grm per cc
- Bond strength : 10 Kg.Cm2
- Compressive Strength : 350 Kg/Cm2
- Flexural Strength : 75 Kg/Cm2
- Water Absorption : 1%
Storage Life -
- Solution : 12 Months at the temperature 30°C (+2°C)
- Powder : 6 Months at the temperature 30°C (+2°C)
All two components are stored in cool and dry place under the roof until ready to use it original unopened (Sealed) containers.
Packing -
- Solution: 25 Kg. in M.S. Drum
- Powder: 25 Kg. in Plastic Bag
Export Packing -
- As per customer’s requirement
